ALLOWANCES IN WELDED GRATING SP AND PRESSED GRATING P SIZES

	Variation in plane within a grating Maximum allowance 5 mmfor gratings ~ 300 х 300 mm – maximum 2 mm

	Maximum difference between diagonals: D1-D2 is equal to 0.012 х S (max. side length)
	Length and width variation с: f = max. + 0 mm up to - 4 mm. Cell step allowance: g = max. ± 1.5 mm. Cell step allowance: d = max. ± 4 mm (when more than 10 steps are measured). Process cut: h; i = max. + 8 mm / - 0 mm.